|
|
2.
Singh, K. V., and Ouyang, H., “Pole Assignment Using State
Feedback With Time Delay In Friction Induced Vibration Problems”, Journal
of Vibration and Acoustics- Transactions of the ASME, 2011 (Submitted)
3.
Singh, K. V., McDonough, L., Mottershead,
J.E. and Cooper, J., “Active Aeroelastic Control by the Method of
Receptances”, Journal of Aircraft, 2010, (Submitted).
4.
Ram, Y., Singh, K. V., Robin,
E. and Mottershead, J.E., “Feedback Control with
Partially Inaccessible State”, International Journal of Control,
2010, (Submitted).
5.
Singh, K. V., Datta, B. N. and Tyagi, M., “Closed
Form Control Gains for Zero Assignment in the Time Delayed System”, Journal
of Computational and Nonlinear Dynamics - Transactions of the ASME,
6(2), pp. 021002-1-9, 2011.
6.
McDonough, L. A., Singh, K. V.
and Kolonay, R., “Active Control for Coupled Unsteady Aeroelastic Models”, Proceedings
of the International Forum on Aeroelasticity and
Structural Dynamics (IFASD 2011), Paris, France, June 2011.
7.
Cooper, J. E., Singh, K. V.,
McDonough, L. A., Mottershead, J. E., Chiozzini, A., and Prandina,
M., “On Using the Receptance Method for Active Aeroelastic Control”, Proceedings
of the International Forum on Aeroelasticity and
Structural Dynamics (IFASD 2011), Paris, France, June 2011.
8.
Singh, K. V., and Datta, B. N., “Zero
Assignment in a Time Delayed Continuous System for Active Vibration Control”,
Proceedings of the IEEE Conference, The International Conference on
Communications, Computing and Control Applications (CCCA’11), March
3-5, 2011 at Hammamet, Tunisia.
9.
Singhal S., Singh, K. V.,
and Hyder, A., “Effect of Laminated Core on Rotor
Mode Shape of Large High Speed Induction Motor”, Proceedings of the
IEEE International Electric Machines and Drives Conference (IEMDC 2011),
Niagara Falls, 15 –18 May 2011, USA.
10.
Singh K. V., Hamilton B. C. and Dymek,
S., “Developing Predictive Tools for Friction Stir Weld Quality Assessment”,
Science and Technology of Welding and Joining, 15(2), pp.
142-148, 2010.
11.
Singh, K. V., McDonough, L., Mottershead,
J. E., and Cooper, J., “Active Aeroelastic Control Using the Receptance
Method “, Proceedings of the ASME International Mechanical
Engineering Congress and Exposition (IMECE-10), November 12-18,
2010, Vancouver, BC, Canada, 2010.
12.
Ouyang, H. and Singh, K. V.,
“Pole Assignment for Asymmetric Systems Using State-feedback with Time
Delay”, Proceedings of the International Conference on Noise and
Vibration Engineering, ISMA2010, Leuven (Belgium), 20-22 September,
2010.
13.
Singh K. V., “Transcendental inverse eigenvalue problems in
damage parameter estimation”, Mechanical Systems and Signal
Processing (Special Issue on Inverse Problems), 23, pp. 1870– 1883,
2009.
14.
Pratt, J. M., Singh, K. V.,
and Datta, B. N., “Quadratic Partial Eigenvalue
Assignment Problem with Time Delay for Active Vibration Control”, Journal
of Physics: Conference Series, Institute of Physics Publications,
181, 012092, 2009. (doi:10.1088/1742-6596/181/1/012092).
15.
Singh K. V., and Li G., “Buckling of functionally graded and
elastically restrained non-uniform columns”, Composites Part B:
Engineering, 40, pp. 393–403, 2009.
16.
Singh, K.V., and Hamilton, B.C., “Developing Predictive Tools
for Friction Stir Weld Quality Assessment”, The 16th International
Congress on Sound and Vibration, July 5-9, 2009, Krakow, Poland.
17.
Holt, D. A., and Singh, K. V.,
“Active/Passive Vibration Control of Continuous Systems by Zero Assignments”,
Proceedings of the International Modal Analysis Conference, IMAC
XXVII, A Conference and Exposition on Structural Dynamics, February
9-12, 2009, Orlando, FL, USA.
18.
Ram Y. M., and Singh K. V.,
“Active absorption of viscously damped system with time delay”, Journal
of Applied Mechanics-Transactions of the ASME,
Vol. 75 (5), pp. 051005-1-4, 2008.
19.
Sawhney, A. P. S., Condon, B., Singh, K. V.,
Pang, S.-S., Li, G., and Hui, D., “Modern
applications of nanotechnology in textiles”, Textile Research Journal,
Vol. 78 (8), pp. 731-739, 2008.
20.
Singh, K.V., Hamilton, B.C., and Boehmer,
S., “Characterization and Estimation of Mass Loss due to Exfoliation
Corrosion from Vibration Spectrum”, Proceedings of the ASME
International Mechanical Engineering Congress and Exposition (IMECE-08),
October 31-November 6, 2008, Boston, MA, USA.
21.
Singh K.V., and Ranatunga, V., “Damage
identification in piecewise uniform rods and beams from vibration data”, Society
for Experimental Mechanics - 11th International Congress and Exhibition on
Experimental and Applied Mechanics 2008-4, pp. 2134-2143, Orlando,
FL, June 2 -5, 2008.
22.
Singh K.V., Hamilton, B.C., and Robbins, T., “Characterization
and identification of friction stir welded aluminum 7136-t76511 extrusions
from static and dynamic testing” SAMPE (Society for the Advancement
of Material and Process Engineering) Fall technical Conference 2007,
Cincinnati, OH, October 29 – November 1, 2007.
23.
Singh, K. V., Datta, B. N. and Tyagi, M., “Zero
Assignment In Vibration: With And Without Time Delay”, Proceedings of
the ASME 2007 International Design Engineering Technical Conferences &
Computers and Information in Engineering Conference (IDETC/CIE 2007), September
4-7, 2007, Las Vegas, Nevada, USA.
24.
Singh, K. V., “Inverse Eigenvalue Problems in Structural
Vibration And Control of Composite Structures”, 15h
International Conference on Composites/Nano Engineering (ICCE -15- 2007),
July 15-21, Haikou, Hainan Island, China, 2007 (Invited paper).
25.
Singh, K. V., Srinivas G., Shukla, A., and, Pang, S.-S., “Detection of
minuscule changes in structures from spectral data”, Proceedings of
the SPIE: Health Monitoring of Structural and Biological Systems (edited by
Tribikram Kundu),
Vol. 6532, pp. 65321F1-65321F12, 2007·
26.
Singh K. V. and Ram Y. M., “Transcendental inverse eigenvalue
problem associated with longitudinal vibrations in rods”, American
Institute of Aeronautics and Astronautics (AIAA) Journal, Vol. 44
(2), pp. 317-322, 2006.
27.
Li G., Maricherla
D., Singh, K. V., Pang S.-S., and John M., “Effect of Fiber
Orientation on Structural Behavior of FRP Wrapped Concrete Cylinders”, Composite
Structures, Vol. 74 (4), pp. 475-483, 2006.
28.
Singh K. V., Li G. and Pang S.-S., “Free vibration and
Physical Parameter Identification of Non-uniform Composite Beams”, Composite
Structures, Vol. 74 (1), pp. 37-50, 2006.
29.
Singh K. V., and
Pang S., “Direct and Inverse Eigenvalue Problems towards the Design and
Identification of Mass-Loaded Micro-Resonators”, Proceedings of the 2006
International Mechanical Engineering Congress and Exposition (IMECE - 2006),
American Society of Mechanical Engineering (ASME), Paper
No.-IMECE2006-16131, pp. 617-627, Chicago, November, 2006.
30.
Srinivas, G.K., Singh, K.V., Li, G. and
Pang, S.-S., “Identification of composite beam delamination parameters”,
Composites Division, Paper # 103048, ANTEC 2006 Charlotte Conference
Proceedings (#0650), Society of Plastics Engineers (SPE) (CDROM),
Charlotte, May 7-11, 2006.
31.
Sawhney, A.P.S., Dumitras,
P.G., Sachinvala, N.D., Calamari, T.A.., Bologa, M.K. and Singh, K.V., “Approaches
for Reducing or Eliminating Warp Sizing in Modern Weaving: An Interim
Report”, AATCC Review, Vol. 5 (9), pp.23-26, 2005.
32.
Singh K.V., Li, G., Jones, R. and Pang, S.-S., “Damage
Identification in Composite Structures from Vibration Data” Society
for the Advancement of Material and Process Engineering(SAMPE)
Conference, Symposium & Exhibition, Long Beach, CA, May 1-5,
2005.
33.
Singh K.V., Li G.,
Pang, S.-S., and, Ram, Y., “Identification of composite beam parameters
from vibration data”, Paper # 102089, ANTEC 2005 Boston Conference
Proceedings, Society of Plastics Engineers (SPE) Boston, MA, May
1-5, 2005.
34.
Singh, A., Singh K. V.,
Ram Y. M. and Pang S., “Zero assignment in continuous systems”, Proceedings
of the Proceedings of the ASME International Mechanical Engineering
Congress and R&D Exposition (IMECE) Conference, Vol. 2, pp.
1065-1071, Paper No.- IMECE2003-43629, Washington, November, 2003.
35.
Singh K. V. and Ram Y. M., “Transcendental eigenvalue problem
and its applications”, American Institute of Aeronautics and
Astronautics (AIAA) Journal, Vol. 40 (7), pp.1402-1407, 2002.
36.
Singh K. V. and Ram
Y. M., “A Mathematical Model to Overcome the Discrepancies Between
Continuous Systems and Their Discrete Approximation”, Proceedings of
the 2002 ASME Engineering Technology Conference on Energy,
ASME-ETCE2002/ OT-29157, Part B, pp. 605-611, 2002.
37.
Singh K. V. and Ram Y. M., “Dynamic absorption by passive and
active control”, Journal of Vibration and Acoustics- Transactions of
the ASME, Vol. 122 (4), pp.429-433, 2000.
|
